⚔️ Collectible Gift Items Presents: Medieval Templar Knight Full Body Armor Set
Unleash your inner crusader with this striking Medieval Templar Knight Full Body Armor Set, crafted for epic battles, cosplay adventures, theatrical performances, and historic reenactments.
Each set is forged from 18-gauge steel and reinforced with thick leather straps for strength, durability, and comfort. Coated inside with rust-resistant paint, and featuring hand-rolled edges for safety, this armor is fully wearable, highly detailed, and designed to fit most adults.
Whether for cosplay, LARP, Halloween, or as a centerpiece for your collection, this armor is the ultimate symbol of knighthood and medieval heritage.
📐 Fit & Measurement Guide
This armor set is designed to fit a broad adult range. Use the measurements below to confirm fit before ordering. All figures are approximate; exact dimensions may vary slightly due to the handcrafted nature of each piece.
How to Take Your Measurements
-
Chest: Measure around the fullest part of your chest, keeping the tape parallel to the ground.
-
Waist: Measure around your natural waist, roughly 1 inch above your navel.
-
Upper Arm (Bicep): Measure around the fullest part of your upper arm with the muscle relaxed.
-
Neck: Measure around the base of your neck where a shirt collar sits.
-
Hand/Knuckle (for gauntlets): Measure around the widest part of your hand, just below the knuckles, excluding the thumb.
-
Head Circumference (for helmet): Measure around the widest part of your head, just above your ears and eyebrows.
Component Measurement Reference
| Component |
Fits (Approximate Range) |
Adjustment Method |
| Helmet |
Head circumference 54–62 cm (21.3″–24.4″) |
Interior padding; not adjustable beyond this range |
| Gorget (Neck Guard) |
Neck circumference up to 42 cm (16.5″) |
Leather strap buckle at back |
| Pauldrons (Shoulder Guards) |
Shoulder width 40–52 cm (15.7″–20.5″) |
Leather strap and buckle |
| Chest / Back Plate (Full Set) |
Chest 86–122 cm (34″–48″) |
Side leather straps, 3-point buckle |
| Gauntlets |
Hand/knuckle circumference 18–24 cm (7″–9.5″) |
Back strap buckle |
| Elbow Guards |
Upper arm circumference 28–38 cm (11″–15″) |
Top and bottom leather straps |
| Knee Guards |
Knee circumference 32–44 cm (12.5″–17.3″) |
Upper and lower leather straps |
| Chainmail Shirt |
Chest 86–126 cm (34″–49.6″); length approx. 70 cm (27.5″) |
No adjustment; pull-over style |
| Templar Cloak |
One size; length approx. 140 cm (55″); shoulder seam ~50 cm (19.7″) |
Tie closure at neck |
| Helmet With Gloves Set |
Head 54–62 cm + Hand 18–24 cm |
See individual items above |
Choosing the Right Option
- If your chest measurement is 86–122 cm and head circumference is 54–62 cm, the standard Full Set fits without modification.
- If you are at the upper end (chest 116–122 cm), order with a note so our craftsmen can pre-adjust the leather strap lengths at no charge.
- If your measurements fall outside the ranges above, contact us before ordering — we offer custom sizing on select components for an additional fee.
- Ordering individual components (e.g., Helmet only, Gauntlets only)? Use the component-specific rows in the table above to confirm fit independently.
⚠️ Because this is a handcrafted reproduction, we recommend adding 2–3 cm of ease to your measurements when comparing to the ranges above.
🕐 Production & Lead Time
-
Production time: 7–15 business days from order confirmation (each set is individually hand-forged and finished).
-
Shipping time: 5–10 business days via DHL, FedEx, or UPS after dispatch.
-
Estimated total delivery: 12–25 business days from order date, depending on destination country.
- Orders placed with custom sizing requests may require an additional 3–5 business days.
- During peak seasons (October–November, December) lead times may extend by up to 5 business days.
📦 You will receive a shipping confirmation with tracking information once your order is dispatched.
🛡️ Event & LARP Safety Guidance
This armor is a decorative and cosplay-grade reproduction. Please read the following before use at any live-action or public event.
-
Not rated for combat: This set is not tested or certified to any ballistic, impact, or combat protection standard. It is not suitable for full-contact sword fighting, sparring, or boffer combat where impacts to the torso, head, or limbs are expected.
-
LARP-safe use: This armor is appropriate for light theatrical LARP, photo shoots, parades, conventions, Halloween events, and display. For combat LARP events, check your event organizer's armor certification rules before attending — many events require certified protection ratings.
-
Hand-rolled edges: All steel edges are hand-rolled to reduce sharpness; however, always inspect edges before wear and report any sharp points to us for guidance.
-
Helmet visibility: The helmet's visor design limits peripheral vision. Do not drive, operate machinery, or move through crowded areas without a helper or spotter while wearing the helmet.
-
Heat & prolonged wear: Steel armor retains heat. Limit continuous wear to comfortable durations, stay hydrated, and wear a padded underlayer (arming doublet or padded gambeson) to reduce chafing and heat transfer.
-
Weight awareness: The full set weighs approximately 8–12 kg (18–26 lbs). Ensure the wearer is physically comfortable bearing this weight for the intended duration.
-
Children & supervised use: This product is intended for adult use. If used by minors for costume purposes, adult supervision is required at all times.
-
Maintenance: After each use, wipe steel surfaces dry to prevent rust. Apply a light coat of oil to exposed steel annually. Store in a dry, ventilated area.
⚠️ This is a reproduction costume armor item. No protection claims are made or implied beyond the decorative rolled-edge finish. Use at your own risk and in accordance with your event organizer's safety rules.
🛡️ Complete Armor Set Includes:
- Helmet
- Gorget with Pauldrons
- Elbow & Knee Protection
- Gauntlets
- Templar Cloak
- Chainmail Shirt
- ⚔️ Optional Sword (included only with the complete set, not available separately)
✨ Features & Craftsmanship
-
Material: 18-gauge steel
-
Interior: Rust-proof coating
-
Straps: Thick brown/black leather for secure fit
-
Safety: Rolled edges for extra protection
-
Fit: Adjustable—fits most adults
-
Style: Handmade | Fully Wearable | Customization Available
📸 Each armor set is individually handcrafted. Slight variations in finish ensure that your piece is unique and authentic.
📜 Reproduction item, not sold as an antique.
🎭 Ideal For:
- Live Action Role Play (LARP)
- Medieval & Fantasy Cosplay
-
Halloween costumes & parties
-
Theatrical productions or movie props
- Historical reenactments
-
Collectors & enthusiasts of medieval armor
🚚 Shipping & Service
-
Fast Global Shipping via DHL, FedEx, UPS
-
Secure Packaging in export-quality boxes
- ⚠️ Custom duties/taxes are the buyer's responsibility
Order Your Templar Knight Armor Today
Bring the valor of medieval knights into your home, collection, or next event with this handcrafted Templar Knight Full Body Armor Set. At Collectible Gift Items, we're committed to quality, authenticity, and craftsmanship.
👉 Explore more medieval collectibles at collectiblegiftitems.com
👉 Order now and step into history with confidence!